bagstrio.blogg.se - Logger pro 3.12 to 3.4

Logger pro 3.12 to 3.4 install#
Logger pro 3.12 to 3.4 update#
Logger pro 3.12 to 3.4 software#
Logger pro 3.12 to 3.4 Pc#
Logger pro 3.12 to 3.4 download#

Logger pro 3.12 to 3.4 update#

It is also sometimes the case that a later firmware revision is loaded in new production consoles but has not been released as an update version for existing consoles. The current revision is v3.88 (released October 8, 2020) for the standard VP2 wireless console, although cabled and envoy consoles may differ in version number.

But if at first trying to reload the correct firmware does not work then try again multiple times before admitting defeat!Įach firmware update revision was originally denoted by its release date alone, though the version number is more important nowadays. This will often correct the issue without difficulty.

Logger pro 3.12 to 3.4 install#

*If you do inadvertently install the wrong firmware then it is always worth trying to repeat the process with the correct firmware version.

Also, it is not uncommon for firmware in newly manufactured consoles to be at a later revision than is available as a firmware update – Davis release the update versions only when they’re ready to do so. *Note that firmware for different console types will not necessarily be at the same revision date/version. (Envoy consoles must be checked via the Weatherlink software.) * Checking the firmware version The firmware version currently installed on your VP2 or Vue console can be seen on the ticker display of the standard console by pressing the Done and cursor ‘+’ keys at the same time.

Logger pro 3.12 to 3.4 Pc#

!There is an important distinction – explained in more detail below – between original 2004/5 release firmware versions for VP2 consoles and all later versions that are intended for ‘Direct PC Install’. It is essential to use the correct firmware update for your console type – loading an incorrect firmware version is likely to cause your console to stop working. So, VP2 wireless consoles have different firmware from VP2 cabled consoles Envoy consoles are different from standard consoles and Vue console firmware is of course different again. ! Important: There are different versions of console firmware designed for the particular type of console that you have. The firmware is a complex piece of coding and inevitably minor errors can creep in, which are sometimes not spotted by anyone for weeks or months after release.Įach console is supplied with the firmware version that was current at the date of manufacture, ie newer consoles have newer firmware.

In response to external events, eg changes in the details of the formula NOAA uses to calculate wind chill values or changes in the daylight saving time calendar in the US.

In response to user feedback, which has, for example, prompted changes to the way in which certain wind speed values are displayed.

To accommodate new VP accessory components (eg wireless repeaters), sensors and stations.

To allow new console features to be added.

Why should upgradeable firmware be necessary? There are a number of reasons, including:

Logger pro 3.12 to 3.4 software#

The Vantage Pro 2 and Vue consoles are designed with upgradeable firmware (firmware being akin to software built in to the console that controls all aspects of its features and operation). This method also works with the WeatherlinkIP logger, except of course that connection to the console/logger is made across your local network rather than direct from PC to logger.Īdditional firmware comments Vantage Console Firmware The firmware will upload through the logger into the console.

Simply run the downloaded firmware executable file (with the console/logger connected to the PC of course!) and follow the on-screen instructions.

(NB See notes at the foot of this page for downloads of v1.9 VP2 firmware and v3.00 Vue firmware.)

Logger pro 3.12 to 3.4 download#

Download the correct firmware for your specfic console type from the Davis website at.It is vital to correctly identify the type of console you have and only to attempt to upload firmware for that specific console type. Vue consoles of MA revision and earlier should not be updated beyond firmware v3.00.

Updating the console firmware for all VP2 consoles made during or after 2006 should be straightforward (despite the extensive notes below – but these mostly deal with special cases like pre-2006 consoles). If you don’t run a Windows PC then you will need eg to borrow use of a Windows laptop for a short while to carry out the update. ! Important: Console firmware updates can only be made from Windows PCs, as explained in more detail further below. This should help prevent you from trying to install the wrong firmware and potentially breaking your console! It is crucial that you download the correct firmware version for your console type. !If this is the first time that you’ve updated the console firmware then please read the more detailed notes below first. VP2 and Vue Console Firmware Quick instructions for updating console firmware